DEUTSCH

Alle Windows Versionen Win-XP Win-7 Win-10 etc.

ASIOund WDM Treiber Download für die asynchronen AQVOX - MyDDC und MyDAC 192/24 USB Module.
Zur Assistenz bei der Treiberinstallation oder bei Problemen rufen Sie bitte umgehend den AQVOX Service an: 040-4100 6890 - KEINE Email Unterstützung !!!

Falls Aussetzer oder Knister zu hören sind, können es folgende Gründe sein:
a) die PC-Hardware die evtl. noch bei Win7 oder XP ausreichend war, bietet nicht die erforderlichen Resourcen für Windows 10
Lösung : den PC aufrüsten oder Windows entschlacken/optimieren
b) die Buffer ( oben links im ASIO Treiberfenster ) auf den doppelten Wert setzen.

Die Installation dauert bis zu ca. 5 Minuten
1. myDDC/myDAC noch NICHT anschliessen
2. die ASIO Treiber Installation starten
3. wenn die Installation fertig ist, 2 bsi 4 Minuten warten, dann- NEUSTART Power off/on des Computers
4. den myDDC/myDAC anschliessen - etwas warten bis sich die Treiber initialisiert haben, 2 bsi 4 Minuten warten, dann- NEUSTART Power off/on des Computers

5. die Musikabspielsoftware starten - wichtig !!! im Musik-Abspielprogramm unter Einstellungen/Soundausgabe muss die ASIO Musiland Ausgabe angewählt werden.


Bei Problemen rufen Sie bitte umgehend den AQVOX Service an: 040-4100 6890 - KEINE Email Unterstützung !!!


1. für 32bit Systeme -- myDDC + myDAC ASIO Windows 32

2. für 64bit Systeme -- myDDC + myDAC ASIO Windows 64

 

Hier die letzte Version der Treiber myDDC + myDAC , bei Problemen bitte diesen deinstallieren und den vorherigen Treiber (oben) installieren.

http://www-old.musiland.cn/index.php/Download/show/id/78

 

ENGLISH

Alle Windows Versions

Win-XP Win-7 Win-10 etc.


ASIO and WDM driver download for the asynchronous AQVOX - MyDDC and MyDAC 192/24 USB devices
For assisted driver installation or in case of any problems please better call the AQVOX Service : +49 - 40 - 4100 6890 - NO Email support !!!

In case you hear drop outs or cracklings, the reason might be:
a) the PC-hardware which was good running under Win7 or XP, has not enough recources fur running Windows 10 with the ASIO driver
Solution: hardware upgrade or clean out and optimize Windows, the later is always a good idea!
b) set the Buffers ( top left in the ASIO driver window ) double the default value .

The Installation takes around 5 minutes
1. do NOT connect the myDDC/myDAC
2. start the driver installation
3. when ready, wait some 2 to 4 minutes and switch off/on the Computer
4. now connect the myDDC/myDAC to USB - wait some 2 minutes until the initialisation process is finished and switch off/on the computer

5. start the Music player software - important !!! in the Music player software under settings / options the audio/soundoutput must be set to ASIO Musiland

 

APPLE MAC OSC ONLY for Snow Leopard !!!

1. Download the M-driver here and put it on the desktop

alternative here the latest BETA version

2. install the M-driver by double click - then restart your MAC
3. connect the myDDC / miniDAC to USB port.
4. go to system settings AUDIO and select the M-Audio USB output
5. start iTunes and Play music
6. click on the round M-symbol in the upper right corner, select SHOW. Now the M-drivers Window shows up.
Here you can see if the Level-Indicators are moving, this indictes music is played through the M-Driver - all seems OK now.
7. if the Level-Indicators are NOT moving, go to system settings AUDIO and select the M-Audio USB output

Troubleshooting: if the Level-Indicators are in a half or frozen state, no sound
1. close any music player software eg iTunes etc..
2. chlick on the round M-symbol in the upper right corner, select EXIT.
3. then restart the M-Driver by clicking on the blue M-symbol in the programs folder.

Two recommended settings for your MAC System :
For HighResolution playback
1. open Audio MIDI Setup, found in /Applications/Utilities. Select the desired output on the left, and then change the settings in the Format section on the right to
96 kHz and 2ch-24bit or 192 kHz and 2ch-24bit. All Files other than 96 (or 192) are now played with 96 or 192kHz.
see here for instructions:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1096.html

For convinient automatic start of the M-driver at every MAC restart
2. the M-Driver must be put into the StartupItems folder , see here for instructions:
http://www.switchingtomac.com/tutorials/how-to-set-programs-to-automatically-run-each-time-your-mac-starts/

Please call for assistance : +49-40-41006890

Bei Problemen bitte anrufen: 040-41006890

 

AQVOX Service